Integrator Notes
Field card 021, Caséta Pico remote (PJ2): OFF 3× + HOLD 6 s, OFF 3×
A4 · PDF · prints in black and white Open full size
LutronFactory resetCard 021

Lutron Caséta Pico remote (PJ2)

Pico still paired? Factory default (OFF 3× + hold 6 s · OFF 3×)

Bench check pending

Written from official documentation and dealer sources, not yet run on our bench. Confirm on your hardware before a reset you can't undo.

The sequence

  1. OFF 3× + HOLD 6 s
  2. OFF 3×

Good to know

  • Release when the LED is solid, re-tap within 0.5 s
  • Test: press ON, the light should not respond
  • Still controls it? Reset the dimmer (TOP button)
Download PDF Print
Previous · No. 020AN-310 router + modem / ONT + OvrC

More Lutron

  • Field card 004: Caséta in-wall dimmer · switch
    No. 004LutronFactory reset

    Caséta in-wall dimmer · switch

    Factory default (tap 3× + hold · tap 3×)

    1. TAP ON 3× + HOLD 3 s
    2. TAP 3×
    Bench check pending
  • Field card 001: In-wall dimmer · switch · keypad
    No. 001Control4Factory reset

    In-wall dimmer · switch · keypad

    Leave the Zigbee mesh and reset (13-4-13)

    1. Tap the TOP button 13×
    2. Tap the BOTTOM button 4×
    3. Tap the TOP button 13×
    Bench check pending
  • Field card 003: SR-260 system remote
    No. 003Control4Factory reset

    SR-260 system remote

    Factory reset and leave Zigbee

    1. Press ROOM OFF
    2. Then # and *
    3. Then 1 · 3 · 4 · 1 · 3
    Bench check pending
Download PDF