Integrator Notes
Field card 005, AN-310-RT router: PRESS = REBOOT, HOLD 10–15 s = FACTORY DEFAULT
A4 · PDF · prints in black and white Open full size
AraknisFactory resetCard 005

Araknis AN-310-RT router

Reboot vs factory default with the RESET button

Bench check pending

Written from official documentation and dealer sources, not yet run on our bench. Confirm on your hardware before a reset you can't undo.

The sequence

  1. PRESS = REBOOT
  2. HOLD 10–15 s = FACTORY DEFAULT

Good to know

  • Release when the status LEDs flash once
  • 192.168.1.1 · araknis / araknis
  • AN-110: same · AN-300: 10 s reboot / 20 s factory (Diag LED)
Download PDF Print
Previous · No. 004Caséta in-wall dimmer · switch

More Araknis

  • Field card 020: AN-310 router + modem / ONT + OvrC
    No. 020AraknisTroubleshooting

    AN-310 router + modem / ONT + OvrC

    Whole house offline after a storm? 5 checks before you call the ISP

    1. MODEM / ONT POWER · PLUG · OUTLET · GFCI
    2. NO INTERNET ON WAN 1 → MOVE TO WAN 2
    3. PHONE HOTSPOT → BRIDGE → WAN PORT
    4. 2 more steps
    Bench check pending
  • Field card 001: In-wall dimmer · switch · keypad
    No. 001Control4Factory reset

    In-wall dimmer · switch · keypad

    Leave the Zigbee mesh and reset (13-4-13)

    1. Tap the TOP button 13×
    2. Tap the BOTTOM button 4×
    3. Tap the TOP button 13×
    Bench check pending
  • Field card 003: SR-260 system remote
    No. 003Control4Factory reset

    SR-260 system remote

    Factory reset and leave Zigbee

    1. Press ROOM OFF
    2. Then # and *
    3. Then 1 · 3 · 4 · 1 · 3
    Bench check pending
Download PDF